TulipToolsServices has a complete set of
Completion Tools
10k bridge plugs
The 10K Type – A Bridge Plug is a dependable tubing or wireline set drillable plug. One piece heat-treated slips provide secure setting
composite bridge plug
The Composite Bridge Plug provides a cost-effective alternative to temporarily isolate multiple zones for fracturing, or other treatments.
crossovers
Crossovers provide safe connections between joints of different sizes and types. Crossover subs are used when it is necessary to have frequent disconnection points whether Box x Pin, Box x Box or Pin x Pin.
eb shifting tool
The EB Shifting Tool is used to shift SLXA, SLXO, and SLXBE Sliding Sleeves; EL Sliding Sleeves as well when using the non- self-releasing keys. It can be made with either self-releasing or non-self-releasing keys
e-hydraulic set packer
The Evolution E-Hydraulic Set Packer is a single-string retrievable packer used for multiple production applications. Tubing pump pressure is used to set the packer with the setting force locked into the unit by a body lock ring
hydro trip sub
The Hydro-Trip Sub is used to hydraulically set tools, such as hydraulic packers with the application of tubing pressure. Setting is achieved by circulating a ball to a seat in the sub, and applying sufficient pressure to activate the setting mechanism in the tool below
n landing nipple
The N Landing Nipple is a full bore landing nipple that allows for the location of many Flow Control Devices, such as blanking plugs, bottom hole chokes, and more
retrievable bridge plug
The Retrievable Bridge Plug is a premium quality high performance wireline retrievable and coiled tubing bridge plug.
running tool
The Running Tool is used to run and set a variety of Flow Control tools such as Blanking Plugs, Check Valves, and Chokes Although it is a simple design, it is versatile in its ability to run different styles of Flow Control devices
sliding sleeves catalog
Sliding Sleeves are essential tools for allowing communication between the tubular and the annulus. This enables circulation and selective zone production in the oil or gas recovery operation
spv-k ball valve
The SBV-K is designed to thread into the tubing at the rig floor and close quickly in the event a pressure surge occurs from below. After weighting material is added to the well fluids, the valve can then be opened and circulation initiated
t2 on-off tool
The T-2 On/Off Tool is a high pressure, left hand release, tubing disconnect device. The tool allows the tubing string to be disconnected above a packer for zonal isolation, tubing retrieval, and temporary zone abandonment
GET A FREE QUOTE TODAY
Location
No. 270 Trans Amadi Industrial Layout, Port Harcourt, Rivers State
Our hours
09:00 AM – 06.00 PM
Monday – Saturday
Contact us
Phone: +234 (0) 809 292 7672
Email: info@tuliptoolsservices.com