Hydro Trip Sub
Applications
- Temporary plug in tubing for setting hydraulically actuated packers
Features
- Works in single and dual completions
- Can be run in any location in the tubing string
- Chrome and phenolic balls available
Benefits
- Single body joint with anti-torque lock screws
- Full tubing ID post shear
- Shear value can be adjusted
- Reliability
- Circulation available prior to ball drop
Description
The Hydro-Trip Sub is used to hydraulically set tools, such as hydraulic packers with the application of tubing pressure. Setting is achieved by circulating a ball to a seat in the sub, and applying sufficient pressure to activate the setting mechanism in the tool below.
When further pressure is applied to the ball, the mechanism shears, allowing the ball to pass down the tubing string.
After the Hydro-Trip Sub has been set, the tool provides an open bore for passage of drop balls or wireline equipment.
Operation
To set a hydraulic packer, drop or circulate a ball down the tubing to the seat in the Hydro- Trip Sub.
Apply sufficient tubing pressure to activate the setting mechanism in the packer. After the packer is set, a pressure increase shears the shear screws in the shear ring, to allow the ball seat to move down until the fingers snap back into a groove. The sub is then fully open with no restrictions to productions, and the ball passes on down the tubing
Pump Out Pressures
Part List
Location
No. 270 Trans Amadi Industrial Layout, Port Harcourt, Rivers State
Our hours
09:00 AM – 06.00 PM
Monday – Saturday
Contact us
Phone: +234 (0) 809 292 7672
Email: info@tuliptoolsservices.com