TulipToolsServices has a complete set of

Completion Tools

10k bridge plugs

The 10K Type – A Bridge Plug is a dependable tubing or wireline set drillable plug. One piece heat-treated slips provide secure setting

composite bridge plug

The Composite Bridge Plug provides a cost-effective alternative to temporarily isolate multiple zones for fracturing, or other treatments.

crossovers

Crossovers provide safe connections between joints of different sizes and types. Crossover subs are used when it is necessary to have frequent disconnection points whether Box x Pin, Box x Box or Pin x Pin.

eb shifting tool

The EB Shifting Tool is used to shift SLXA, SLXO, and SLXBE Sliding Sleeves; EL  Sliding Sleeves as well when using the non- self-releasing keys. It can be made with either self-releasing or non-self-releasing keys

e-hydraulic set packer

The Evolution E-Hydraulic Set Packer is a single-string retrievable packer used  for multiple  production  applications. Tubing pump pressure is used to set the packer with  the setting force locked into the unit by a body lock ring

hydro trip sub

The Hydro-Trip Sub is used to hydraulically set tools, such as hydraulic packers with the application of tubing pressure. Setting is achieved by circulating  a  ball  to  a seat in the sub, and applying sufficient pressure to activate the setting mechanism in the tool below

n landing nipple

The N Landing Nipple is a full bore landing nipple that allows for the location of many Flow Control Devices, such as blanking plugs, bottom hole chokes, and more

retrievable bridge plug

The Retrievable Bridge Plug is a premium quality high performance wireline retrievable and coiled tubing bridge plug. 

running tool

The Running Tool is used to run and set a variety of Flow Control tools such as Blanking Plugs, Check Valves, and Chokes Although it is a simple design, it is versatile in its ability to run different styles of Flow Control devices

sliding sleeves catalog

Sliding Sleeves are essential tools for allowing communication between  the  tubular  and  the annulus. This enables circulation and selective zone production in the oil or gas recovery operation

spv-k ball valve

The SBV-K is designed to thread into the tubing at the rig floor and close quickly in the event a pressure surge occurs from below.  After weighting material is added to the well fluids, the valve can then be opened and circulation  initiated

t2 on-off tool

The T-2 On/Off Tool is a high pressure, left hand release, tubing disconnect device. The tool allows the tubing string to be disconnected  above  a  packer  for  zonal isolation, tubing retrieval, and temporary zone abandonment

GET A FREE QUOTE TODAY

Location

No. 270 Trans Amadi Industrial Layout, Port Harcourt, Rivers State

Our hours

09:00 AM – 06.00 PM
Monday – Saturday

Contact us

Phone: +234 (0) 809 292 7672
Email: info@tuliptoolsservices.com